Product Description

VPI Avenger table was originally a project started by Harry over 12 years ago. In the process of the design the project was dropped in mid-production due to excessive demand by HR-X customers which left the design and proto-type chassis to be mothballed. The good news about the abandoned design is Harry instead shifted his focus into starting and completing the VPI Classic Turntable.

The working name was the "Tri-Pod Project". Being newly motivated, Harry has finally put in motion the table that will be his master piece! The unique iterations that had been crafted from the original process were completed as Special Editions.

The Table:

The VPI Avenger chassis is three layers of bonded acrylic/aluminum/acrylic, with damping material between layers, locked in by 3 isolation steel corner posts, 3 bolts, and the massive bearing assembly.  The corner posts which hold the tonearms (up to three will fit) have adjustable machined knobs giving the user the ability to easily raise and lower the height to level the table.  The corner posts connect to the cone stabilizers which sit in a machined Delrin/ball bearing isolation base reminiscent of the same used on the Prime turntable.  Fully adjustable armboards are made from 5/5 6061 aluminum for rigidity and grounding. The table can mount up to three arms, any manufacture's brand, and any length!

The Magnetic Drive Assemble:

The drive platter is mounted to the 5/8 center shaft which goes through both platters and deep into the bottom of the bearing assembly. The bottom bearing is an oil bath, the PEEK thrust disc on the bottom bearing takes the full 30 pounds total of both platters. We tried levitating the drive platter with opposing ring magnets for less wear but the low end deteriorated as you took off weight. Sorry other table makers, get a set of JBL Everest's and you will hear it too!! Bass requires a good solid footing.

 The top platter, or slave platter, is in a PTFE Super Lube inverted bearing with almost zero rotational motion so there is no wear on that thrust disc. The powerful magnets from the drive platter grab the magnets in the slave platter and send it rotating noiselessly with a beautifully damped motion. Wow and flutter levels are exceptionally low but noise level is approaching 100 db down!!!

Available Upgrades:


Additional JMW Tonearms

 Additional Armboards

Product Categories

DLS LOUDSPEAKER
Home Cinema

Product Categories

ELAC
Home Cinema

Product Categories

GRAND VIEW
Home Cinema

Product Categories

MARANTZ
Home Cinema

Product Categories

ONKYO
Home Cinema

Product Categories

PARASOUND
Home Cinema

Product Categories

SCREEN INNOVATIONS
Home Cinema

Product Categories

SONY
Home Cinema

Our Partners

Check out the hifi and AV brands that we represent, we believe you'd agree that they are some of the finest from USA, Europe and Japan.

Have a question or need a custom quote?

Please Contact us at +603 7728 2686 or email to info@centrecircleaudio.com.my